If you’re a laptop user, you know how frustrating it can be when your laptop battery dies. Especially when you’re on the go and you don’t have a charger with you.
There are a few ways to charge your battery manually. But remember, the right connections are key.
Connecting the Charger
The battery is the powerhouse of your laptop, and it needs excellent care to keep up with the demands of its users. Its charger is another vital part of the system.
If your battery isn’t charging, there are a few possible reasons. First, you need to ensure that the cable is connected correctly.
Secondly, you need to make sure that the port isn’t obstructed. Dirt and dust buildup can disrupt the connection.
Finally, you need to check that the power adapter is the right wattage for your device. A lower wattage charger will not be enough to charge your battery and will drain it too quickly.
You can also try plugging in a different charger to see if that works. But beware: USB-C chargers are not standardized, so some may not work with your specific laptop.
Connecting the Battery
The laptop battery is an important part of your computer. It helps you to power your devices, but it also requires periodic maintenance and repair.
When a laptop battery isn’t working, the first thing you should do is check it for any physical damage. This can include punctures, bulges or even a broken connection.
If you can’t see any signs of damage, remove the battery from your laptop and hold the power button down for a few seconds to drain any residual charge.
This will help determine whether the problem is with the battery or the charger. If you don’t have a removable battery, you may need to call your laptop manufacturer for a replacement.
Once you have a spare battery, you can start charging it manually. The process is easy, but you need to ensure that you’re using the right battery for your device.
Performing a Deep Cycle
The best way to make your battery last longer is to charge it in a controlled manner. This is called a deep cycle.
A deep cycle means that you discharge the battery down to a certain percentage and then recharge it back up to 100%. This is a very important part of battery maintenance as it helps prevent the buildup of harmful chemicals in the battery.
If you don’t perform a deep cycle, the batteries can sulfate and damage the electronics that use it. This can cause the computer to malfunction and may also be a fire or explosion hazard.
A deep cycle can be performed on both lead acid and lithium batteries. Lithium batteries are more expensive but offer better usable capacity and fast recharge rates.
Performing a Short Cycle
If your battery is draining fast or suddenly dropping its percentage, it may be time to perform a short cycle. This can help resolve problems like a 20% charge to 6% in a short period.
Performing a short cycle is an easy way to fix this issue and get your laptop back up and running. It involves unplugging your AC adapter and then running the battery down for a short time.
To do this, open a Command Prompt and type the following command: sys -C "Battery Cycle Count Report"
This will give you the number of cycles your battery has gone through. You should see something like 500-1,000 cycles on most batteries, which means they're healthy and should last a long time.